| |
Our help on irc commands includes Chanserv, nickserv, and memoserv and modes
commnds.
Our staff channel #yaran.team and the official help channel of iran #help.persian
will be your best choice to ask any questions
Nickserv
Chanserv
Memoserv
Modes
User Modes
Channel Modes
Nickserv
REGISTER:
/ns register password email,
. This command will allow you to register your nickname with nickserv.
. Note: always use a good password and the REAL email, because if they lose the
password is the only way to get it back.
IDENTIFY: /ns identify password or /pass password.
. This command will allow you to identify with nickserv.
RECOVER: /ns recover nickname password.
. This command will help you to recover your nick when a user is using it, you
can disconnect them using the recover command.
GHOST: /ns ghost nickname password.
. This command will allow you to disconnect your nickname when it is still here
after we got disconnected
RELEASE: /ns release nickname password.
. This command will allow you to release a nickname that is being held by
enforcers.
DROP: /ns drop nickname.
. This command will allow you to drop your nickname
. You should first identify to NickServ with the nick password, then use the
drop command.
. Note: If you drop a nickname and you have a channel, your channel will drop
too.
INFO: /ns info nickname.
. This command allow us to get all server information for an specific nick, such
as registration date, last time seen, owner's user@hostmask, also the
information the users entered with the field command.
ACC: /ns acc nickname.
. With this command we can verify what is the user status towards the nickname,
such as if the user is identify to it, if the user is matching the user access
list or if the user doesnt have any access.
. Possibles displays:
. user is not online, the nickname is not register
. -acc 0 (no access)
. -acc 1 (matches the access list)
. -acc 2 (identify)
ACCESS: /ns access list.
. Allows you to list, add, delete or wipe user@host masks from your nickname.
. Note: when we register a nickname our user@hostmask is added automatically in
our nick access list.
. -/ns access add <user@host mask>
. -/ns access del <user@host mask>
. -/ns access wipe
WATCH: /ns watch add/del/list <nick|channel>.
. This command will have ns manage your watch list.
. A watch list is similar to a notify list.
. i.e /ns watch add estrella
BUDDY: /ns buddy add/del/list <nick|channel>.
. This command will have ns manage your buddy list.
. Same as watch and similiar to a notify.
. i.e /ns buddy add Ninjo
LISTCHANS: /ns listchans nickname.
. Allows you to have a list of all the channels you have access to.
. Note you can only see the list of your nickname.
AUTH: /ns AUTH <command> [<nick|id>].
. The AUTH the Authorization process when adding a nickname on your buddy/watch
list.
. LIST - Gives your a list of the requests
. VIEW - Read the AUTH request Message
. READ - Read the AUTH request Message
. APPROVE - Approve the authorization request.
. ACCEPT - Approve the authorization request.
. DECLINE - Decline the authorization request.
. REJECT - Decline the authorization request.
NickServ Set
AUTHORIZE: /ns set authorize buddy <on|off>.
/ns set
authorize chanlists <on|off>
Buddy:
. With this command you will
force others users to ask you for authorization before being added to their
buddy or watch list.
. If you use authorization off, anyone will be able to add you to their lists.
. If you use the authorization on, everyone interested in add you will have to
request it to you, via memoserv.
. ie.: /msg NickServ SET AUTHORIZE, /msg NickServ SET AUTHORIZE BUDDY on
Chanlist:
. When this is on, Chanserv
won't allow your nickname being added in Channels UOp, VOp, AOp, or SOp lists.
Anyone that want to add you will have to requeste it to you. After you aprove
you will be autmatically added to the channel list.
PASSWD: /ns set passwd newpassword.
. This allows you to change your channel password.
URL: /ns set url http://www.yourweb.com
. This command allow you to set an url to your nickname info.
NOMEMO: /ns set nomemo on/off.
. This command allow you to chose if you want to recive memos or dont.
NOOP: /ns set noop on/off.
. If it's On : ChanServ will no longer automatically op you on channels that you
have access to. You must use the ChanServ OP command.
. If it's Off : ChanServ will now automatically op you on channel that you have
access to.
EMAIL: /ns
set email newemail.
. This command allows you to chance your email in your nick info.
SHOWEMAIL: /ns set showemail on/off.
. If a user wishes his/her email to be seing for other uses, he/she should turn
it on.
PROTECT: /ns set protect on/off.
. This command allows you to protect your nick from being used, the user
nickname will be change to a guest one, if they dont enter the nick password.
SECURE: /ns set secure on/off.
. This command makes NickServ ignore nickname access lists, when deciding if a
user has access to a nickname. If this setting is on, in addition to the kill
setting, and the user matches an access list, NickServ will not enforce the
PROTECT switch, however the user will not be granted any privileges.
MRECEIPTS: /ns set mreceipts on/off.
. With this command you won't get back notifications from the memos you have
sent.
MFORWARD: /ns set mforward on/off nickname.
. This will redirect all memos arriving to the nickname you specify. to disable
it /ns set mforward OFF.
FIELD: /ns set field.
. This command will allow you to add information about yourself, and it will be
displayed in the /ns info nick, i.e /ns set field age 12.
. NOTE: to delete a field you must enter de field you want to del without any
information and press enter. i.e /ns set field age (enter).
ChanServ
INFO: /cs info #channel.
. You can get who is the founder, when it was register etc.
. Note: that in this new services just Registered Nicknames can be added to the
uop/vop/aop/sop channels list.
UOP: /cs uop #channel add nickname.
. Uops wont see any difference in what a channel modes goes, the uops can get
memos but not send, Note that limit is 250 uops per channel list.
. ie /cs uop #www add fiend
VOP: /cs vop #channel add nickname.
. The vop will have a + before their nickname, he/her can get and send memos to
the channel, they can invite themselves to the channel they are vop in, note
that a vop list limit is the 250 users.
. You can /cs vop #channel add/del/wipe and list.
. ie. /cs vop #www add sharkoleto
AOP: /cs aop #channel add nickname.
. The aops are added by sops and the founder, the aops can kick/ban user from a
channel. Note that the limit is 250 aops per channel list.
. You can /cs aop #channel add/del/wipe and list.
. ie. /cs aop #www add Ninja
SOP: /cs sop #channel add nickname.
. Sops are added by the founder, the sops can add/del/wipe/clean the channels
list, they can also mkick the channel. Note that the limit is 250 sops per
channel list.
. ie /cs sop #www add Sabine
REGISTER: /cs register #channel password desc.
. This command allows you to register your channel.
. Desc will be the description of what is your Channel about, ie. General chat,
adults, hobbies etc.
IDENTIFY: /cs identify #channel password.
. This command allows you to identify with chanserv with your channel password.
DROP: /cs drop #channel.
. This command allows you to drop your channel.
. The channel founder must identify with the channel password first.
OP: /cs op #channel nickname (s).
. Will give op to the given nick (s) in the given channel.
. Will not work if secured ops is on and if the user isn't in the aop/sop list.
This to be use by aops and highier.
DEOP: /cs deop #channel nickname.
. This command is used to remove operator status from someone in a channel. this
to be used by aops and highier.
VOICE: /cs voice #channel nickname.
. This command is used to devoice a user in a channel.
DEVOICE: /cs devoice #channel nickname.
. This command is used to devoice a user in a channel.
INVITE: /cs invite #channel.
. The invite must be done if a channel is +i.
. You cannot invite other users via chanserv.
MDEOP: /cs mdeop #channel.
. This command removes all ops from their status in the specific channel.
. The founder wont be deopped bye this command.
MKICK: /cs mkick #channel.
. This command evacuates the channel by kicking everyone out, banning *!*@*,
setting the channel +i, this command should be use only in takeovers situations.
UNBAN: /cs unban #channel me/all.
. This command will remove bans in the specific channel, the ME option can be
use for Aops and above, and it will remove all the banes that matches your
current address.
. The ALL option is limited to sops or above, and it will removed all the banes
in the channel ban list.
COUNT: /cs count #channel
. This command will display the #'s of uop/vops/aops/sops and akicks.
. Limited to uops or highiers. ie. /cs count #www
WHY: /cs why #channel nick.
. This command will return the reason why a user has an access level to a
speciied channel, ops and higher can use it.
ACC: /cs acc #channel nickname.
. This command will return the access level of the specific user in the
specified channel.
ACCESS: /cs access #channel nickname.
. This command is the same as acc.
ChanServ
Set
AUTOVOICE: /cs set #channel autovop on/off,
. This command replace the /cs vop #channel add *@*
. This command will give all the users that aren't on the channel list +v when
they join the channel. But if they are banned they wont be able to invite
themselves back. you will get this msg: -ChanServ- Automatic voice on join
enabled for #abcdi.
IDENT: /cs set #channel ident on/off.
.The ops will have to ident first in order to get their op status.
OPGUARD: /cs set #channel opguard on/off .
Only aops/sops will be allowed operator status in the channel.
TOPICLOCK: /cs set #topiclock on/off founder/sop/aop.
This command allows the founder to select who will be able to change the topic.
KEEPTOPIC: /cs set #channel keeptopic on/off.
When this option is ON, cs will save the last topic set and re-set it when the
channel is recreated.
RESTRICT: /cs set #channel restrict on/off.
This command prevents the user that isn't on the uop and above have access to
join the channel.
FOUNDER: /cs set #channel founder. Allows the channel founder
to be able to change. it has to be set for the user that wants to have the
foundership, but the user to identify with the channel password first.
MEMOLEVEL: /cs set #channel memolevel vop/aop/sop/NONE
when the NONE option is specified, only the founder can send memos.
URL: /cs set #channel url YourURLhere,
/cs set #channel url NONE. (to delete the url)
Allows the founder to attach a url in the channel info, and it will be displayed
in the channel info.
DESC: /cs set #channel DESC description.
This will be used to change the channel desc.
EMAIL: /cs set email #channel email.
This allows you to attach your email in the channel info. Note the NONE option
will delete the email.
PASSWD: /cs set #channel passwd newpassword.
MLOCK: /cs set #channel mlock +|-<modes>
Allows the founder to lock modes, either on or off according to the specified
patterns. Specifying an empty pattern disables MLOCK Modes "k" and "l" can only
be used manually if they are to be used with a value. Examples: /mode #channel
+k Key
or /mode channel +l 3. Modes "k" and "l" can only be modelocked by ChanServ if
used without parameters as shown in the examples:
-/cs set #www mlock +tn
-/cs set #spiderslair mlock -kl
-/cs set #webchat mlock +tn-klpi
MemoServ
SEND: /ms send
send a memo to a specify user
ie. /ms send nickname msg.
SENDTO: /ms sendto
Send a memo to a specific channel list)
ie. /ms sendto #channel vop/aop/sop msg
LIST: /ms list
list your current memos)
ie. /ms list
READ: /ms read
Read a memo
ie. /ms read #
DELETE: /ms del
Mark a memo as deleted
options:
/ms del #
/ms del all or *
/ms del from #:to # ie. /ms del 1:8 (will delete memos from 1 to 8)
Note:
The memos you delete will go to the recycler box.
EXPUNGE: /ms expunge
Delete permanently all memos from the recycler box
CLOSE
|
